Casambi EldoLed DUALdrive 560/A 2-channels DL0560A3
Be careful; To make this driver 'Casambi-ready' you need to choose a so-called radio. You will find the radios as the last article in the product field. For this driver, choose profile 5402 (dimming 2 channels separately).
This 50W driver has 2 outputs that can be dimmed and dimmed separately (55V max. Per output). The minimum dimming power can be reduced with this driver to even 0.1%. After we know your wishes regarding, among other things, the desired current output (depending on your LED, eg 500mA), we configure the driver here and deliver it. The amperage may be between 150mA and 1400mA, adjustable per mA (eg 888mA may also). This driver works per channel between 1.5 and 55V and is completely flicker-free, so that the driver can even be used in film recording studios. The channels may be set separately, for example channel 1; 350mA / channel 2; 750mA.
The advantage of this driver lies in the fact that each output can reach up to 55V / channel. Suppose you have 2 groups of 500mA / 24W; P = UxI / 24W = Ux500mA / U = 48V (<55V) where the total power is 2x24W = 48W (<50W).
You may work with quite long wires from the driver to the LED load, depending on the core cross section;
2 x 0,5 / up to 14 meter
2 x 0,8 / up to 22 meter
2 x 1,0 / up to 28 meter
2 x 1,5 / up to 36 meter